MS-150™

Features & Benefits

• 12″, 16″ and 20″ coverage options (other widths inquire)
• 26, 24 & 22 Tru-Gauge™ and .032″ Aluminum
• 16 & 20 oz. Copper (please inquire)
• Zinc Coil (inquire for thickness)
• Floating clip system: allows for expansion/contraction of panels in longer lengths
• 1-1/2″ vertical rib
• Factory injected Butyl sealant
• Concealed fasteners: fasteners cannot leak
• 1:12 minimum pitch recommended (for lower pitches, please inquire)
• Standard panel lengths 3′ to 60′ – not notched
  Standard panel lengths 1′ to 60′ – notched
  (For longer panels, please inquire)
• Onsite roll forming available
• Panel options: Striations, Accent Ribs, and Flat Pan
• OverEZee retro-fit systems available
• Weathertightness warranty available (contact TMP representative for details)

Testing

• ICC 5046 #5046 with CBC-CRC Supplement
• Code compliance UL Evaluation Report UL ER #25913-01
• UL Construction No. 554, 588, 603, 604, 605
• UL 580 Class 90 Wind Uplift rated
• UL 790 Class A (ASTM E108) – Fire rated
• UL 2218 Impact Class 4 – Impact (hail) rated
• ASTM E1680 – Air Infiltration (roof)
• ASTM E283 Air Infiltration (wall)
• ASTM E1646 – Water Infiltration (roof)
• ASTM E331 – Water Infiltration (wall)
• ASTM A653/A924 – G90 Galvanized
• ASTM A792 – Zincalume/Galvalume AZ-50/55
• ASTM B209 – Aluminum Substrate
• ASTM E2140 Standard Test Method for Water Penetration (full immersion)

   DI SEAMER RENTAL: click here 

DI SEAMER Standard Rental Guidelines: click here

• 180 degree seams are not considered an architectural detail. The detail improves the weather tightness and wind uplift capabilities of the panel system, but will show stress and waviness in the seam. The detail is recommended for slopes less than 3/12, roof areas not easily viewed from the ground, and for high wind areas. For additional information, contact a TMP representative and DI Seamers for support and information about the proper use of seaming tools.

Material Specifications

• 26 gauge Kynar 500® Painted Steel .019″ (thickness prior to painting) G-90 Galvanized or Zincalume® AZ-50
• 24 gauge Kynar 500® Painted Steel .0236″ (thickness prior to painting) G-90 Galvanized or Zincalume® AZ-50
• 26, 24 & 22 gauge bare Zincalume® Plus AZ-55 (no finish warranty  – 25 year perforation warranty)
• 22 gauge Kynar 500® Painted Steel .029″ (thickness prior to painting) G-90 Galvanized or Zincalume® AZ-50
• .032″ Kynar 500® Painted Aluminum
• 16 and 20 ounce Copper (please inquire)
• Kynar 500® and substrate testing data available (see website)
• “Oil Canning” is an inherent characteristic of roof and wall products, and not a defect, which is not a cause for panel rejection.

Finishes

• 21 Standard Colors, 5 Metallic Colors and 4 Specialized Colors
• Vintage® has a color range that can vary from batch-to-batch and have directional variations
  • For more information: click here
• Rusteel Plus™ has no metallic coating, is unpainted and has no warranty
  • For more information: click here
• Kynar 500® Paint System-the ultimate in exterior durability and color retention
• “Cool” color pigments are specially designed to reflect infrared light, reducing heat gain to dwelling, and conform with ENERGY STAR® criteria
• Superior quality, two-coat, 70% resin finish, applied at a 1 mil. thickness
• 40-year residential paint warranty
• 20 and 30 year commercial paint warranty: (Contact Champion Metal for warranty specifications)